WR Coated Wiper Blade

-Normal Glass with 5 min NaoTechValfine® Coated Wiper Blade Wiping
-Water Repellent Effect will remain with Wiping Treatment
-https://www.facebook.com/pages/Naotch-Co-Ltd/575810195771605

-NaoTechValfine® working with non treated glass
-NaoTechis supplying wiper blades over the worldNaoTechValfine

-NaoTechValfine® is only proved WR Coating for wiper blades durability
-NaoTechValfine®'s proven Wiping Performance

• Water Repellent Performance Improvement
• Wiping Performance Improvement
• No Oil Film Problem
• Lubricant Durability Improvement
• Rubber Durability Improvement
• Using NR Rubber with good durability and wiping performance.
• Water Repellent Performance in Coating NOT Rubber Inside
• Multi Layer Coating (1st, 2nd and 3rd coating on Rubber)

-NaoTechValfine® 3 Layer gives durability and performance
-NaoTechValfine®'s proven performance

Water Repellent Performance Durability

Flat Wiper Blade
Product Name	Valfine FL980
Size	300~700mm
Application
Main Material	Synthetic Rubber, 1 Pieces
Rubber	Natural Rubber

Conventional Wiper Blade
Product Name	Valfine CN882
Size	350~700mm
Application	9x3, 9x4 Hook
Main Material	High Carbon Steel
Rubber	Natural Rubber

Hybrid Wiper Blade
Product Name	Valfine HB781
Size	350~700mm
Application	9x3, 9x4 Hook
Main Material	Plastic and High Carbon Steel
Rubber	Natural Rubber

How to Install

1. Move the wiper arm to a place where you can separate the wiper blade from the wiper arm.
2. Turn off the engine.
3. Figure out a way to keep the windshield safe. Use a towel or other things.
4. Take off the old wiper blade.
5. Now install our wiper blade. Make sure it make a clicking noise.
6. Separate the wiper blade lip protection cover by pushing. Avoid touching the edge.
7. Check if the wiper blade rubber has not been damaged or it is attached to the handle.
8. Carefully rest the wiper blade on the windshield and put back the wiper arm.
9. Try the wiper several times and check if there is any vibrations and sounds if there is any problems, stop using it

Package Sample

How to apply the water repellent coating

1. Do this when the weather is clear. Clean the windshield so there isn’t any dust.
2. With water on the windshield keep the wiper on for 5 to 7 minutes.
3. Without washing the windshield again with water leave the windshield for a day for the water repellent to apply. Leave it under the sun for best performance.

* If the car's windshield is damaged, has a strong curve on the glass or the glass is almost flat the water repellent may not have the best performance or it might create some vibrations.
* if the car is old the wiper arm might be weak so it might create some vibrations.